Full complement Thrust bearing

Contact Now

Consist of a radial needle roller bearing and a thrust ball bearing.

Are supplied without an inner ring.

Can be combined with an inner ring, where the shaft cannot be hardened and ground.

Can accommodate axial loads in one direction and, therefore, locate the shaft in one direction only.

Can be mounted back-to-back, for short shafts and where changes in length due to thermal expansion are relatively minor
For these types of arrangements, recommends preloading the thrust ball bearings with Belleville washers (cup springs).

This preload helps to prevent the balls from skidding if one of the thrust bearings becomes unloaded.

Preload also improves performance of the thrust ball bearings while reducing noise levels.

Bearing Number	Bore Dia	Outer DIa	Width	Size
TTSV265 Full complement Thrust bearing	1.220 in	0.5512 in	2860 lbf	3/4 in
TSX150 Full complement Thrust bearing	8 mm	H7	18 mm	0 m/s
TSX205 Full complement Thrust bearing	439 kg	5610 kN	710 mm	6 mm
TSX750 Full complement Thrust bearing	437 N/µm	70.8 mm	1920 N	243 N/µm
TTSV320 Full complement Thrust bearing	280.0000 mm	200.000 mm	1.00 mm	550000 N
TTSV610 Full complement Thrust bearing	15000 r/min	17000 r/min	3.35 kN	G 25x32x4
TSX440 Full complement Thrust bearing	129.794 mm	4 x 7/8-9 UNC	422.275 mm	136 kN
TSX555 Full complement Thrust bearing	530.225 mm	89 kN	SNW 130x5.1/8	5
TTSV554 Full complement Thrust bearing	3/4 NPT	41.275 mm	4.763 mm	EPR 19
TTSV610 Full complement Thrust bearing	13.9 mm	900 min-1	180 mm	320 mm
TTSV525 Full complement Thrust bearing	275000 N	190.000 mm	2.50 mm	2100 rpm
TSX440 Full complement Thrust bearing	104.4 mm	49 kN	92 mm	170 mm