Full complement Thrust bearing

Contact Now

Consist of a radial needle roller bearing and a thrust ball bearing.

Are supplied without an inner ring.

Can be combined with an inner ring, where the shaft cannot be hardened and ground.

Can accommodate axial loads in one direction and, therefore, locate the shaft in one direction only.

Can be mounted back-to-back, for short shafts and where changes in length due to thermal expansion are relatively minor
For these types of arrangements, recommends preloading the thrust ball bearings with Belleville washers (cup springs).

This preload helps to prevent the balls from skidding if one of the thrust bearings becomes unloaded.

Preload also improves performance of the thrust ball bearings while reducing noise levels.

Bearing Number	Bore Dia	Outer DIa	Width	Size
TSX380 Full complement Thrust bearing	500 N/mm²	1 mm	1 mm	170 mm
TSX380 Full complement Thrust bearing	5 mm	467 mm	0.2	64.8 kg
TTSV554 Full complement Thrust bearing	280 mm	4.5 mm	1 600 min-1	650 kN
TSX900 Full complement Thrust bearing	25 mm	870 mm	112 mm	M 12
TSX640 Full complement Thrust bearing	65.00 mm	Two Shields	280.000 mm	3.00 mm
TTSV640 Full complement Thrust bearing	Without Accessories	87100 N	6300 rpm	50.000 mm
TSX640 Full complement Thrust bearing	73.025 mm	4.99 kg	3.175 mm	27.781 mm
TSX508 Full complement Thrust bearing	28100 N	19.00 mm	9200 rpm	72.0000 mm
TTSV525 Full complement Thrust bearing	95.25 mm	1 in	4.763 mm	394 kN
TSX495 Full complement Thrust bearing	90 mm	18 mm	84 max	6011
TSX920 Full complement Thrust bearing	45 N/mm²	16 mm	12 mm	105 °
TTSV320 Full complement Thrust bearing	17 mm	0.3 mm	13 mm	22 mm